Installation For Application 2: Travel Router Mode - Netis E1+ Quick Installation Manual

Installation for Application 2: Travel Router Mode

3.2.1 Hardware Connection
1) Connect the LAN/WAN port of E1+ to an xDSL/Cable/Fiber modem
or uplink Ethernet port with an Ethernet cable.
2) Plug E1+ to a standard electrical socket.
3.2.2 Configuration
Step 1. Search and connect to the E1+ network "netis" with your computer
or mobile terminal device.
Step 2. Open your browser and type "http://netisext.cc" in the address
field to visit E1+'s web management page.
Note: If the login page cannot pop up, please check your computer is
set to obtain IP address automatically.
WP S
E1+
Networks
Airplane mode
Off
WIFI-409
WIFI-411
WIFI-410
WIFI-407
!
netis
Other people might be able to see
info you send over this network
Connect automatically
Connect
http://netisext.cc
netis Wireless N Range Extender Quick Installation Guide
Modem
(Take Windows 8 as an example)
8