Wireless Optimization; Internet Connection - Netis E1+ Quick Installation Manual

1) Wireless Optimization

Note: The system will automatically finish this step.

2) Internet Connection

The system will automatically detect your Internet Connection Type then
please manually fill in the needed network parameters from your ISP
(Internet Service Provider).
If the Internet Connection Type isn't detected successfully or shows wrong,
please manually select the type and fill in the needed network parameters
from your ISP.
Model No.:E1+ Firmware Version:V1.2.31730
Step1 Wireless Optimization
Checking Your Wi-Fi Environment...
Http:// www.netis-systems.com E-mail: support@netis-systems.com
Model No.:E1+ Firmware Version:V1.2.31730
Step1 Wireless Optimization
Automatically set the best Channel!
Automatically set the best Radio Band!
Automatically set enhanced Signal Strength!
Starting to detect your Internet Connection Type...
Http:// www.netis-systems.com E-mail: support@netis-systems.com
Model No.:E1+ Firmware Version:V1.2.31730
Step2 Internet Connection
Your Internet Connection Type is: DHCP
DHCP Static IP
Next
Http:// www.netis-systems.com E-mail: support@netis-systems.com
netis Wireless N Range Extender Quick Installation Guide
Auto-Detect
PPPoE
10
Home