Package Contents; Hardware Information; Led; Button And Port - Netis E1+ Quick Installation Manual

netis Wireless N Range Extender Quick Installation Guide

1.Package Contents

2.Hardware Information

LED

Button
2.1 LED
LED Status
Solid Blue
Solid Orange
Flashing Blue/Orange
Purple

2.2 Button and Port

Item
WPS Button
LAN/WAN Port
Note: Different power plug is provided for different region. Here we just take US
version for example.
WPS
E1+
WPS
Range Extender mode
The connection between E1+ and main
router is stable.
The connection between E1+ and main
router is unstable. Please check the main
router status and put E1+ closer to it.
E1+ is not connected to the front device (Main router, xDSL/Cable
/Fiber modem).
The device is initializing.
Range Extender mode
Quick extender setup:
Press button for 1~2 seconds to activate
the WPS function.
Factory default setting:
Press and hold the WPS button for about 5 seconds until the
LED is flashing.
Connect to a wired device like desktop,
set-top box, printer, for network sharing.
Ethernet Cable
Indication
Description
1
netis Wireless N Range Extender
Quick Installation Guide
Quick Installation Guide
LAN/WAN Port
Travel Router mode
Normal signal
Enhanced signal
Travel Router mode
Signal strength switch:
Press the button for 1~2
seconds, the signal strength
can be switched between
normal signal and
enhanced signal.
Connect to an xDSL/Cable/
Fiber modem or uplink Ethernet
port for Internet Access.