Clean Box; When Replacing The Main Pcb; Service Position - Lumix DMC-FZ35P Service Manual

7.2.

Clean Box

7.2.1. Servicing the Lens unit.
To keep dust proof environment when repairing lens unit, CLEAN BOX is recommended (less than class 10,000 Federal Standard
209D).
7.2.2. Introduction of Clean box.
One of our recommended clean box is as shown below.
It consists of "Air clean unit" and "Clean hood".
As for the "Air clean unit", refer to the "Jig Information" on the "Support Information from NWBG/VDBG-AVC" web-site in "TSN
system".
7.3.

When Replacing the Main PCB

After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at "software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN system", together with Maintenance software.
7.4.

Service Position

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No. Parts No.
1 RFKZ0416
2 VFK1951
3 VFK1953
4 VFK1974
Table S1 Extension Cable List
Connection
FP9801 (MAIN) - CCD UNIT
FP9003 (MAIN) - LCD UNIT
FP9005 (MAIN) - LENS FPC UNIT
FP9006 (MAIN) - LCD UNIT
27
Form
41 PIN 0.3 FFC
39 PIN 0.3 FFC
40 PIN 0.5 FFC
4 PIN 0.5 FFC