Battery Check; Useful Tips; Techical Specifications; Power Led Solid - NIXON mini blaster User Manual

Portable wireless speaker
Hide thumbs Also See for mini blaster:
Table of Contents

Advertisement

**show illustration of USB cable connecting between the BLASTER to a wall socket using the USB to AC
adapter

**Power LED solid

When charging is complete, the Power LED will stop flashing and illuminate solid if the BLASTER is
powered ON, or turn off completely if the BLASTER is powered OFF.
NOTE: A full charge will take about 6 hours when connected the USB port of a computer and only 3 hours
when connected to a power source using the included USB to AC adapter.

BATTERY CHECK

**Power Button -->> **Power LED flash
Press the Power Button once then release. The Power LED will turn off briefly, and then flash in a
repeating pattern to indicate the battery status.
**Power LED RED flash x 4 (show 4 symbols)
**Power LED RED flash x 3 (show 3 symbols)
**Power LED RED flash x 2 (show 2 symbols)
**Power LED RED flash x 1 (show 1 symbol)
**Power LED YELLOW flash x 1 (show 1 symbol)
On a full charge, the battery will last about 12 hours, depending on the volume level and music content.
**Power LED RED solid -->> Power LED YELLOW solid
NOTE: When the battery is LOW, the Power LED will change from RED to YELLOW while powered ON.

USEFUL TIPS

You can extend the battery life of the Blaster by listening at lower volumes.
You can also see the battery in the Status Bar of Apple iOS devices when connected via Bluetooth.
You can avoid sound dropouts by keeping the battery charged and staying within a reasonable
wireless range.
The Battery Check function is most accurate when music playback is stopped.
Be careful when cleaning the Blaster. Wipe down dirty surfaces with a lightly damp cloth then let
dry. Do not use chemical cleaners or run under water.
Clean dust, debris, and sand form the Blaster with a light brush or with a can of compressed air.
Do not blow air directly into the speaker grill as this may cause damage to the speaker drivers
inside.

TECHNICAL SPECS

Bluetooth v2.1 + EDR, A2DP, AVRCP, HFP, HSP
Supported Codecs: AAC, apt-X
Wireless Range: 10m (33 ft)
Output Power: 3W RMS x 2
Frequency Response: 80 – 20,000 Hz
Charging Input: DC 5V 1A
Dimensions: 21.85 x 9.5 x 4.5 cm
Weight: 525g
100%
75%
50%
25%
LOW

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents