Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 15-3531 Service Manual

Replacing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the display hinges with the screw holes on the
computer base.
2 Replace the screws that secure the display hinges to the computer base.
3 Route the display cable through the routing guides on the computer
base.
4 Connect the display cable to the system board and adhere the tape to
the display cable.
5 Route the antenna cables through the routing guides on the computer
base.
6 Connect the antenna cables to the wireless card. See "Replacing the
Wireless Card".
7 Close the display and turn the computer over.
8 Replace the screws that secure the display hinges to the computer base.
9 Turn the computer over and open the display as far as possible.

Post-requisites

1 Replace the palm
2 Replace the keyboard.
3 Replace the optical-drive
4 Replace the base
5 Replace the battery.
62
Computer. After working inside your
rest.
filler.
cover.
After Working Inside Your