Hozelock (ESPECIALLY THE POWER CABLE customer services. AND THE PLUG). DO NOT USE THE PUMP IF IT IS DAMAGED. Every Hozelock Water Butt Pump is carefully tested and packed NEVER USE THE POWER CABLE during assembly. TO LIFT THE PUMP On receipt, check that the pump has not been damaged during transport.
the mains lead of this product may not people can become immersed in correspond with the colours or water. markings identifying the terminals in This pump shouldnot be used for your plug, you should proceed as table fountains / aquariums / follows: fountains / filters for fish ponds / waterfalls.
Overload protection AquaPod, & all Sprinklers. It is optional with sprayguns , nozzles • The Hozelock Water Butt Pump has a & lances). built in thermal protection switch. Pump storage The pump stops if an overload condition occurs.
Blocked impeller Unplug from the electricity supply and remove possible obstructions from the impeller Damaged motor Contact Hozelock customer services for assistance. Pump has overheated Pump contains thermal protection - check if pump case is hot, and if so, allow to...
Water is leaking from Inlet assembly not tight Tighten the outlet of the pump enough Hozelock connector not Re-attach Hozelock correctly attached connector Pump Specification Max Pumping Height, Hmax: 11m Maximum Suction Height : 8m...
Page 9
Hozelock Ltd. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Midpoint Park, Contact you local government for information regarding Birmingham B76 1AB. England the collection systems available. If electrical appliances are disposed of in landfills or dumps,...
Need help?
Do you have a question about the 2826 and is the answer not in the manual?
Questions and answers