Special Tools - Yamaha ME422STI Service Manual

GEN
INFO

SPECIAL TOOLS

The proper special tools are necessary for complete and accurate adjustment and assembly.
Using special tools will help avoid damage caused by the use of improper tools or incorrect
procedures.
(These special tools are recommended by Yamaha. The tool numbers indicated below are those of TOYOTA Motor
Corporation, except for the tools marked with *.)
ILLUSTRATION
SPECIAL TOOLS
TOOL No.
09248-64011 Valve clearance adjust-
ing tool
*TDG-7 Compression gauge
(from BANZAI) attachment
*NO.30
(from IYASAKA)
09275-54001 Plunger stroke measur-
ing tool
09950-40011 Puller B set
09951-04010 Hanger 150
09952-04010 Slide arm
09953-04010 Center bolt 150
09354-04010 Arm 25
09955-04060 Claw No.6
09955-04011 Craw No.1
09957-04010 Attachment
TOOL NAME
To valve clearance adjustment
(Page 3-14)
To measure compression
(Page 3-19)
To check injection timing
(Page 3-28)
(Page 5-11, 5-20, 5-22, 5-23)
To remove camshaft timing pulley, oil
pump drive gear, crankshaft timing
gear and injection pump drive gear
bearing
To remove camshaft timing pulley, oil
pump drive gear, crankshaft timing
gear and injection pump drive gear
bearing
To remove camshaft timing pulley, oil
pump drive gear, crankshaft timing
gear and injection pump drive gear
bearing
To remove camshaft timing pulley, oil
pump drive gear, crankshaft timing
gear and injection pump drive gear
bearing
To remove camshaft timing pulley,
crankshaft timing gear and injection
pump drive gear
To remove injection pump drive gear
bearing, oil pump drive shaft gear
To remove injection pump drive gear
bearing
1-12
E
REMARKS