Description - Craftsman 172.74545 Operator's Manual

DESCRIPTION cont.
This Trimmer/Edger has the following features cont.:
7. Edge Guide provides a cutting guide to help protect flowers, plants, screens and fences
from being cut by trimmer line.
8. Adjustable Telescopic Shaft allows adjustments from 16 to 25 inches for your ideal
working height.
9. Lightweight and Ergonomically Designed for easy use, handling comfort and
efficient trimming and edging.
10. Bump-Feed Head allows you to simply bump the trimmer head to advance cutting line.
11. Your Trimmer uses 0.065-in. round line. Use Craftsman 71-85967 bump feed
replacement spool and line. It's factory wound for maximum reliability.
12. Cord Retention Hook helps keep
the extension cord in place.
13. Safety Guard helps keep cuttings
and debris away from operator.
4-Finger Trigger Switch
Fig. 3
Auxiliary Handle
Auxiliary Handle
Adjusting Knob
Adjustable
Telescopic
Top Shaft also
Top Black Collar for
Rotates 180
Adjusting Length
for Edging
of Top Shaft
Lower Black Collar for
Rotating Top Shaft 180
Trimmer Head
Motor
Housing Trimmer Head 4-position Adjustment
Air
Vents
Safety Guard
Edge Guide
Cutting Line
DESCRIPTION cont.
SPECIFICATIONS
Cutting Path
Speed
Rating
Line Diameter
Line Feed Mechanism
Trimmer Head Tilt
Adjust Height of Shaft
Cord Length
Trigger Switch Handle
Power Requirement
Cord Retention Hook
Pigtail Power
ASSEMBLY & ADJUSTMENTS
Cord Plug
o
NOTE: THE GUARD MUST BE ATTACHED to the trimmer head before use.
o
INSTALLING THE SAFETY GUARD (Figs. 4 and 4a )
1. Disconnect the trimmer from the power supply.
WARNING:
!
from the power outlet BEFORE installing parts or cleaning the trimmer or
making any adjustments.
2. Turn the trimmer's motor housing head over to provide access to underside base
of the head by the cutting line spool.
3. Locate the 4 screws in the base of the trimmer head and remove the screws (see Fig. 4).
Bump-Feed Head
12
15 inches
7200 RPM
5.5 Amp
0.065 inch round line
Bump feed
4 positions
From 16 to 25 inches
12 inch Pigtail Power cord
120-volt, 60 Hertz AC Only
To avoid injury, ALWAYS turn off and disconnect the trimmer
13