Specifications - NAD C556 Service Manual

SPECIFICATIONS

GENERAL
TURNTABLE
Drive system
Motor
Speed
Suspension system
TONEARM
Operation
Length
Effective mass
Overhang
Cable capacitance
CARTRIDGE SPECIFICATION: ORTOFON OM5E
TRANSDUCER CHARACTERISTICS
Frequency response
Channel balance
Channel separation
Output voltage
Tracking force range
Tracking force recommended
Vertical tracking angle
Stylus radius
Stylus type
ELECTRICAL CHARACTERISTICS
Recommended load resistance
Recommended load capacitance
Internal inductance
Internal impedance, DC resistance
MECHANICAL CHARACTERISTICS
Cartridge weight
Tracking weight
Replacement stylus unit
PHYSICAL SPECIFICATIONS
Unit Dimension (W x H x D) with dust
cover down
Net Weight
Shipping Weight
Specifications are subject to change without notice.
For updated documentation and features, please log onto
www.NADelectronics.com for the latest information about the C 556.
Belt drive
High torque synchronous motor
33.3 and 45.1 rpm
3 energy absorbent synthetic rubber feet
Manual
289 mm total length; 244 mm pivot to
stylus
9 g
19.1 mm
150-400 pF
±2 dB (20 Hz – 20 kHz)
2 dB at 1 kHz
22 dB at 1 kHz, 15 dB at 15 kHz
4 mV at 1 kHz, 5cm/sec.
1.5 - 2.0 g (15-20 mN)
1.75 g (17.5 mN)
20 degrees
Elliptical 0.00072 x 0.0003 inch; 18µ x 8µ
r/R 8/18µ
47 kohms
200 – 600 pF
450 mH
750 ohms
5 g
1.5 - 2.0 g (15-20 mN)
Stylus 5E
447 x 115 x 360 mm
17 ³/₈ x 4 9/₁₆ x 14 ³/₁₆ inches
4 kg (8.8 lbs)
7 kg (15.4 lbs)
1-4