Download Print this page

Assembly - John Lewis Anna cot Instruction Manual

Step 1

Part B

Part A

Assemble the fixed side (part B) to the cot ends (part A) using four 50 mm bolts (fixing 1). Note

the fixed side should be assembled to the cot end legs on the side without dropside grooves and

side's top overhang should be inside cot. Do not tighten bolts at this step.

Step 2

WARNING!

The t

of the mattress

surface must not be higher

than this mark!

Part B

Part A

Attach crossbeam (part E) to the cot ends (part A) inserting barrel nuts (fixing 3) and wooden

dowels (fixing 5) into the crossbeam. Then insert bolts (fixing 2) through the holes in the

cot ends into barrel nuts (fixing 3). Do not tighten bolts.

Part A

Overhang should be

inside cot.

Part A

Part E

Fixing 1

Fixing 2

Fixing 3

Fixing 5