Enabling/Disabling The Autostart Countdown Feature; Switching Between Attended And Unattended Mode; Enabling/Disabling The Language Selection Mode - Cardiocity RhythmPadGP User Manual

4.19 Enabling/Disabling the Autostart Countdown feature

The UseAutostartCountdown
capture will be preceded by a countdown, continuing to the capture without user
input and false where there will be no countdown screen before the capture time.

4.20 Switching between Attended and Unattended mode

Attended is a key operational concept and mode for the RhythmPad System. In Attended
mode, the system is to be used with clinical staff present helping the user operate
the system and giving them advice. In unattended mode the system is being used in
standalone mode with no clinical staff present.
The two options for this variable are true where the sessions will follow the "attended"
flow. This includes results screens with ECG traces and options for emailing and
printing if configured in such a way and false where the session follows the
unattended flow. This includes showing disclaimer screen and asking if the subject is
registered with the ClinicName. No results are shown, but will end by showing
appropriate end screens for green or non-green results.

4.21 Enabling/Disabling the Language Selection mode

The ShowLanguageSelection
display of the multi language options at the start of a screening.
If set to true, then the language select screen will be shown before the start screen. If set
to false, no language select screen will be shown, and so will begin on the start
screen with the base configured language.
RhythmPadGP Manual.doc 20/05/16
Cardiocity Limited – RhythmPad
variable can be set into two modes: true where the
variable offers the user two variables that control the
GP
– User Guide- Page 38