Enabling/Disabling The Anonymous Patient Function; Changing The Print And Email Options; Changing The Patient Id Type Option; Enabling The Gp Email List Option - Cardiocity RhythmPadGP User Manual

4.13 Enabling/Disabling the Anonymous Patient Function

For the AnonymousPatient
anonymous mode. When this variable is set to true, print-outs and emails will not
show an ID (either patient initials or hospital ID). When set to false. print-outs and
emails will show IDs.

4.14 Changing the Print and Email options

The PrintAndEmailOption
are displayed and controlled. There are five options available and these allow the
user to tailor how the interface will work. When set to:
None: At the end of a session, no print or email options are available.
Optional presents the option of printing or emailing the results.
AutoEmail automatically emails the results if they were not Sinus Rhythm.
AutoPrint automatically prints the results if they were not Sinus Rhythm
AutoOptional allows the emailing/printing of results if they were not Sinus Rhythm
(Please note that AutoEmail only works when
will send to the email defined in CloudEmailAddress.)

4.15 Changing the Patient ID type option

The PatientIDType
HospitalID: The Input Hospital ID screen will be displayed during a session
Initials: The patient initials input screen will be shown instead during a session

4.16 Enabling the GP Email List option

UseGPEmailList
known doctors operate and each has an individual email address, then at the end of
each screening it is possible to send the results of the screening to an individual
doctor's email address. The list of doctor's email addresses is maintained in the
GPEmails.xml file and a maximum of 8 doctor's email addresses may be stored in
this list.
At the end of the screening if this variable is set to true the system will display a list
of selectable GPs prior to emailing the results to the selected address. When this
variable is set to false, emails will always be sent to the email set in
CloudEmailAddress.

4.17 Changing the Capture Mode variable

CaptureMode
The
three operational modes.
OneLeadOnly only allows 1-lead captures to be made.
SixLeadOnly only allows 6-lead captures to be made.
All allows both 1-lead and 6-lead captures to be masde

4.18 Enabling/Disabling the user to skip the Support Video

AllowVideoSkip
video that allows the user to skip to the end of the video. The parameters for this
variable are true, which after the video has started, a second or so later, a "skip"
button will appear which will skip the playback and false, where no skip button will
be shown during video playback.
RhythmPadGP Manual.doc 20/05/16
variable allows the user to set the system into
variable controls how the Printing and Emailing options
variable allows two options to be set by the user:
is a feature that when the system is being used in a surgery where
variable allows the user to set the RhythmPad system into one of
simply displays a "skip" button during the instructional support
Cardiocity Limited – RhythmPad
UseGPEmailList
GP
– User Guide- Page 37
is not active, and