Philips 40PFL4706/F7 Service Manual page 27

13. Press [9] button to select the "LDB" for Low Drive
Blue adjustment ("LDB" appears on the screen.)
and press [CH + or -] buttons to adjust the color
temperature.
14. Press [7] button to select the "LDR" for Low Drive
Red adjustment ("LDR" appears on the screen.)
and press [CH + or -] buttons to adjust the color
temperature.
15. If necessary, adjust the "LDB" or "LDR" again.
16. Press [PREV. CH] button to enter the Service mode
again.
17. Press [INFO] button on the remote control unit to
shift to the self check mode screen.
If "W/B OK" is displayed, this adjustment
completes.
If "W/B NG" is displayed, press the [VOL -] button
to shift the "Drive setting" mode. Then repeat above
steps from 5. to 15. Check the self check mode
screen. If "W/B NG" is displayed, replace the LCD
Panel or Digital Main CBA.
18. To cancel or to exit from the White Balance
Adjustment, press [PREV. CH] button.
Internal(Single)
LDB 0
5-3 PL11.3EA