Cabinet Disassembly Instructions; Disassembly Flowchart; Disassembly Method - Philips 40PFL4706/F7 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

[40PFL4706/F7 (Serial No.: DS1)]

1. Disassembly Flowchart

This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[1] Arm
Assembly
[2] Base
[8] Speaker
Assembly
[9] AC Inlet
[3] Rear Cabinet
Holder
[4] Digital Main [5] Power Supply
CBA Unit
CBA Unit
[6] PCB Holder [7] Stand Bracket
[12] Panel
Holder B
[14] Panel
Holder L
[15] LCD Module
Assembly
[16] Front
Cabinet

2. Disassembly Method

Step/
Fig.
Loc. Part
No.
No.
Arm
[1] D1 4(S-1)
Assembly
Base
[2] D1 ---------------
Assembly
Rear
[3] D1 14(S-2), 4(S-3)
Cabinet
6(S-4), CN3101,
CN3102, CN3801,
CN3901, Wireless
Digital Main D2
[4] LAN Adaptor,
CBA Unit D5
Jack Holder A,
Jack Holder B,
Shield Box
Power
D2 4(S-5), CN1, CN4,
[5] Supply
D5 Separation Sheet
CBA Unit
[10] Function
CBA Unit
[11] IR Sensor
CBA Unit
[13] Panel
Holder R
Removal Note
---
---
---
---
---
4-1
Step/
Fig.
Loc. Part
No.
No.
[6] PCB Holder D3 5(S-6)
Stand
[7] D3 6(S-7)
Bracket
[8] Speaker D3 ---------------
AC Inlet
[9] D3 2(S-8), CL601
Holder
Function D3 CN4001, Knob Frame,
[10]
CBA Unit D5 Function Button
IR Sensor D3
[11] Shield Plate
CBA Unit D5
Panel
[12] D4 2(S-9), (S-10)
Holder B
Panel
[13] D4 3(S-11)
Holder R
Panel
[14] D4 3(S-12)
Holder L
LCD
[15] Module D4 2(S-13)
Assembly
Front
[16] D4 ---------------
Cabinet
↓ ↓ ↓
(1) (2) (3)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Removal Note
---
---
---
---
---
---
---
---
---
---
---
↓ ↓
(4) (5)
PL11.3-A_DC