Dell sonicwall x series Deployment Manual page 33

Figure 4. Isolated link topology
To set up isolated links for management and data traffic:
1 Provision the switch as described in
2 Set up the data uplink as described in
3 Navigate to the Network > PortShield Groups page.
4 Click the External Switch Configuration tab.
5 Click Add Switch. The Add External Switch dialog displays.
6 Configure the ID through Confirm Password options as described in
17.
7 To specify the port on the switch via which the firewall manages the switch, select the port from the
Switch Management drop-down menu.
Provisioning an X-Switch on a TZ series appliance
Adding an extended switch
Dell SonicWALL X-Series Solution Deployment Guide
Configuring the X-Series Solution in various topologies
on page 9.
on page 17.
Adding an extended switch on page
33