Dell sonicwall x series Deployment Manual page 28

Configuring a dedicated uplink with a common uplink
To configure a dedicated uplink topology with an common uplink:
1 Provision the switch as described in
NOTE: For this example, a cable is connected to TZ port X3 and switch port 2, which has a human
icon in the port icon. This connection is a common link because it carries both management and
data traffic.
2 Set up the common uplink as described in
The External Switch Configuration tab is updated.
The External Switch Configuration and Port Graphics tabs are updated.
Provisioning an X-Switch on a TZ series appliance
Adding an extended switch
Dell SonicWALL X-Series Solution Deployment Guide
Configuring the X-Series Solution in various topologies
on page 9.
on page 17.
28