Dell sonicwall x series Deployment Manual page 11

7 Log in to the X-Series switch user interface (UI).
NOTE: The username is admin and the password is admin.
The Initial Setup Welcome page displays.
8 If you have not recorded the switch's information in
9 Click Next. The Network Settings page displays.
10 To ensure the X-Series switch's IP does not change dynamically when the DHCP server is enabled on the
firewall, ensure Static IP is selected for IP Address Source instead of Dynamic IP (DHCP), which is the
default.
NOTE: Selecting Static IP requires that you must specify a default gateway.
11 Verify the Static IP Properties information.
12 Configure the IP addresses of the switch in the appropriate fields; for example:
IP address
Subnet Mask
Gateway
192.168.2.1/24
255.255.255.0
192.168.2.2
Step 2, do so now.
Dell SonicWALL X-Series Solution Deployment Guide
Provisioning an X-Switch on a TZ series appliance
11