Fcc Part 68 - Patton electronics 2156 User Manual

1.3 FCC PART 68

Caution
1. You are required to request service from the telephone company before
you connect the Model 2156 or 2157 to a network. When you request
service, you must provide the telephone company with the following
data.
— The required Universal Service Order code (USOC) jack: RJ-11C
— The make, model number, Ringer Equivalence Number (REN),
and FCC Registration number of the Model 2156 or 2157.
The REN helps you determine the number of devices you can con-
nect to your telephone line and still have all of those devices ring
when your number is called. In most, but not all, areas, the sum of
the RENs of all devices should not exceed five (5.0). To be certain of
the number of devices you can connect to your line, you should call
your local telephone company to determine the maximum REN.
— The Facility Interface Code: 02LS2
— The Service Order Code(s) (SOC): 9.0F
— REN No.: 0.2
2. Your telephone company may make changes to its facilities, equip-
ment, operations, or procedures that could affect the proper func-
tioning of your equipment. The telephone company will notify in
advance of such changes to give you an opportunity to maintain
uninterrupted telephone service.
3. If your Model 2156 or 2157 causes harm to the telephone network,
the telephone company may temporarily discontinue your service. If
possible, they will notify you in advance, but if advance notice is not
practical, you will be notified as soon as possible and will be
informed of your right to file a complaint with the FCC.
4. If you experience trouble with the Model 2156 or 2157, contact Pat-
ton Electronics Company for service or repairs. Repairs should be
performed only by Patton Electronics Co.
5. You are required to notify the telephone company when you discon-
nect the Model 2156 or 2157 from the network.
The Models 2156 and 2157 are not intended to be con-
nected to the public telephone network.
4