GE GNE26GGDABB Owner's Manual page 25

Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
REMOVE THE REFRIGERATOR DOORS
(cant)
Note:for proper installation later, pleasefollow the next step
carefully.
r_ Remove the tape and keeping the door as
straight as possible, open the door to 90 ° then lift
straight up to remove it.
Lift up & off
center hinge
Open Door to 90 °
ra
REMOVE OPPOSITE DOOR
Follow the some procedure on the opposite
door. There ore no wires or water lines on the
opposite side
REMOVE CENTER HINGE lif necessary)
Remove the 5/8" screws securing the center hinge to the cabinet.
Use T20 driver to remove outboard screw
Remove
center _
screw Loosen Outer screws
F_]REINSTALLING THE REFRIGERATOR D OORS
Reversesteps I through 4 to reinstall refrigerator, follow
details below for critical alignments.
[_ Reinstall center hinge first and torque the screws to
65 in-lbs. With the LH door at 90 ° to the front of
the case, lower the refrigerator door onto the center
hinge. Ensure that the door and hinge align correctly.
r_ Rotate doors closed and make sure moveable center
sealing portion of the door aligns with the striker. If the
door will not self close after reinstalling, remove door,
turn door upside down, check alignment mark and
arrow; (thereis an alignment mark on the door closure
mechanism It corresponds to an alignment arrow on
the plastic ring. Rotate door closure mechanism to align
mark and arrow, reinstall door).
Underside OF
Fresh Food Door
Securely tape the door shut with masking tape or have a
second person support the door. Reinstall the top hinge
and torque the screws to 65 in-lbs.
25