FUNAI NB620FX4 Setup Manual

SETUP MANUAL
NB620FX4
NB620FX4F
See the Online Owner's Manual for details:
www.funaiamerica.com
Step 1 Please visit website www.funaiamerica.com
Step 2 Select Download.
Step 3 Type in the Model # "NB620FX4" or "NB620FX4F" and
click "Search".
Step 4 Select the Manual, and click on "Download".
For product recycling information, please visit - www.funaiamerica.com
Click on
FUNAI is a registered trademark of Funai Electric Co., Ltd. and may not be
used in any way without the express written consent of Funai.
© 2013 Funai Electric Co., Ltd.
Printed in China
ECD07UH / ECD0BUH
2VMN00038 ★★★★★
* 2 V M N 0 0 0 3 8 *
1

CONNECTIONS

Connection to a TV
AC plug
LAN HDMI OUT
HDMI cable
(not supplied)
Wired and Wireless Connections
Wireless
Wireless Connection
broadband router
Active Internet connection is required to your
or
modem or broadband router. If there is trouble
connecting to the Internet, refer to the relevant
topics in TROUBLESHOOTING.
Wired Connection
Modem or
Router
LAN HDMI OUT
LAN cable (not supplied)
2

INITIAL SETUP

Please locate the Source / he Source /
Input / AUX / Video button ideo button
on TV's remote control. The control. The
button may vary on the TV y on the TV
brand and model. Once you el. Once you
have located the button, e button,
AV/SOURCE
Pow w er Button Power Button n press until you see "Please see "Please
Wait..." or the Initial Setup Initial Setup
Menu on the Screen. creen.
Initialization
Welcome!
This unit is ready for initialization. Please
follow the on-screen instructions.
Next
Cancel
Return
Select your language.
Quick Start Mode Automatically check for latest software
Would you like to activate the Quick Start Mode?
The unit will start up more quickly, but will consume
more power in standby mode.
On
Off
Return Return
Network Selection
If you select "Wired",
Please select the connection method.
please go to
Wired
Wireless
If you select "Wireless",
Return
please go to
Cancel
1 / 7
4

WIRELESS SETUP

Auto
Scan
Return
Cancel
Network Setup
Network Selection
Please select the connection method.
Wired
Wireless
Next
Return Retry
Return
Cancel
Cancel
1 / 7
If your router has a PBC*
Easy
( Push Button Configuration )
Connect
button, you can use (WPS)
"Push Button Method"
which is the easiest way to
set up a wireless connection.
Return
If your router does not have it,
Cancel
please use the "Auto Scan" setup.
After clicking [OK] on "Push Button Method", push the PBC button on your wireless router.
Internet * PBC button may be called WPS
button on your wireless router.
D Note
• If you are experiencing signal
issues with your wireless
connection, please confirm that
your wireless router is placed
close enough to the unit.
3

WIRED SETUP

Please Wait... Please Wa
Network Setup
Language Language
Please select your language for on-screen
display.
English
Español
Network Selection
Français
Please select the connection method.
Wired
Wireless
Return
Cancel
1 / 7
Would you like to activate the software update
feature? When connected to the Internet,
the unit will automatically check for the latest
software.
On
Network Settings
Off
Select whether to set the IP address and other
settings automatically or manually.
Auto
Manual
Return
Cancel
4 / 7
in step 3 .
in step 4 .
Network Selection Access Point Setting
Please select the setting mode. Please select the access point.
Wireless Access Point A
Auto Scan
Wireless Access Point B
Manual
Wireless Access Point C
Easy Connect (WPS)
Wireless Access Point D
Retry
Wireless Access Point E
Return
Wireless Access Point F
Cancel
2 / 7 3 / 7
Access Point Setting Network Settings
Select whether to set the IP address and other
Please confirm the setting.
settings automatically or manually.
SSID : Wireless Access Point A
Auto
Security : WPA-PSK (AES)
Manual
WEP/WPA Key : xxxxxxxxxxxxxxxxxxxxxxxx
Return
xxxxxxxxxx
Cancel
4 / 7
3 / 7
Network Settings Access Point Setting
Push Button Method
Please select the setting mode.
Please push the PBC (push button configuration) on the wireless router
and select 'Push Button Method' button on screen.
Auto Scan
Manual
PIN Code Method
Easy Connect (WPS)
Please select 'PIN Code Method' button on screen.
Return
Cancel
2 / 7 2 / 7
When the unit has successfully been connected to an access point,
appears in the upper left corner of the Home Menu screen.
* This icon does not necessarily mean that this unit is connected to the Internet.
Wireless network setting is completed.
You are ready to enjoy network features over WiFi !
Network Setup

TROUBLESHOOTING

Problem
No power.
Network Settings
Please wait a moment. Please press [RETURN] to
stop this operation.
No sound or picture.
State : Setting...
6 / 7
It may take a few minutes.
Network Settings
No reaction to the
Please wait a moment. Please press [RETURN] to
stop this operation.
remote control.
State : Connecting...
6 / 7
It may take a few minutes.
Network Settings
No high-defi nition
video signal on the TV
Home Network : Pass
Internet : Pass screen.
Network connection succeeds.
Distorted picture.
End
7 / 7
No sound or
distorted sound.
Cannot play back a
disc.
Network Setup
Cannot connect to
the network.
Access Point Setting
Please input the WEP/WPA key with software keyboard.
Done Return Clear a/A/@
3 / 7
Enter the security key to your
wireless router. Key content is case-sensitive.
Cannot use the
From here on, the headers will show
wireless connection.
"Access Point Setting" when using
"Easy Connect (WPS)" setup.
It may take a few moments.
Network Settings
Home Network : Pass
Internet : Pass
Network connection succeeds.
End
If you do not find a solution above, please visit our website
7 / 7
www.funaiamerica.com
If "Home Network" passed,
Please download it and then refer to "TROUBLESHOOTING" section
but "Internet" failed, please
contact your Internet service
for more information. If additional support is required, please contact
provider for troubleshooting assistance.
our Customer Service at 1-877-393-8624.
If setup fails using "Easy Connect (WPS)",
SERVICING
please select "Auto Scan" or "Manual" mode.
• If this unit becomes inoperative, do not try to correct the problem
by yourself. There are no user-serviceable parts inside. Eject the
disc (if possible), disconnect the USB Memory Stick (if connected),
place the unit into standby mode, unplug the power plug, and then
please visit:
contact: 1-877-393-8624
Tip
• Check the AC power cord, if it is properly connected.
• Unplug the AC power cord, and wait for about 5-10
seconds. Plug it back in and attempt to Power On the unit.
• Make sure both the TV and Blu-ray Disc™ player are
Turned On.
• Confi rm the connections to the TV are made properly as
shown in CONNECTIONS.
• Check to see whether the connected TV or another
device supports HDCP. (This unit will not output a
video signal unless the other device supports HDCP.)
• Confi rm that the player's AC power cord is plugged into
a power outlet.
• Check the batteries in the remote control, and make
sure they are inserted properly by + or - symbols.
• Aim the remote at the unit's remote receiver. Then
press any arrow key and confi rm the Power-On indicator
dims and blinks when a remote button is pushed. This
confi rms that unit is receiving the remote IR signal.
• Does the disc contain high-defi nition video and the TV
support it? High-defi nition video is only available when
the disc contains it and the TV supports it.
• Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
• Adjust the volume.
• Check the HDMI connection as necessary.
• Make sure the HDMI cable is not plugged into an HDMI-
DVI adapter which does not handle Digital sound.
• Check the settings in "Audio Out" menu.
• Make sure that the product supports the disc.
• Check the region code of the disc. This unit supports
the following region codes.
- Blu-ray Disc™: "A"
- DVD: "ALL" or "1"
• Clean the disc.
• Check to see if the modem / router has Power turned
On.
• Confi rm, if the Internet light is showing activity (light
blinking) on the modem / router.
• Check network settings on the unit. Please refer to
Online Owner's Manual.
• Power cycle the modem's and/or router's AC plug from
its AC outlet for 30 seconds, and then plug it back in.
Then, try reconnecting cords. If you have a telephone
/ Internet modem with your cable service, then you
may have to use its reset button or remove the backup
battery to reset this type of modem. Now wait for the
lights to show activity and try reconnecting.
• Check the cable connections to the router.
• If none of above solves trouble, please contact your ISP
(Internet Service Provider) for further assistance.
• Once you have activated the wireless connection, please
wait 30 seconds for the connection to be established
after Turning On the unit, before trying to access
network features such as BD-Live™, DLNA home
network server and the third-party network services.
• If appears in the upper left corner of the Home
Menu screen, this unit is connected to an Access Point.
Please contact your ISP for further assistance when you
cannot access BD-Live™ or network services.
for the Online Owner's Manual.
www.funaiamerica.com/support
or