Samsung SDH-C75080 Quick Network Setup Manual page 4

7.
If the connection does not establish, check all cable connections
and go to step 2.1 and select <Repair>.
On the "Local Area Connection Status" window, click
<Support> tab and check <Default Gateway> if matches to the
one found in the [cmd.exe], and check the connection again.
Step 3. Connecting DVR to the router
Step 3.1 Configuring DVR router setup
1.
Press the [MENU] button on the remote control.
2.
Use the left/right button (◄►) to select <Network>.
Network menu is selected.
Use the up/down buttons (▲▼) to move to <Connection Mode>, and
3.
press [ENTER] button.
4.
Select <Interface>.
A window of connection mode setup appears.
5.
Use direction buttons (▲▼◄►) to move to a desired item.
6. Enter the <IP address>.
The IP address consists of 4 fields, and the first 3 fields should be same to those of <Default Gateway> address of
your computer which can be found in Step 2, and the last field should be unoccupied number (between 2 and 254).
ex) IP : 192.168.1.200
`
7. Enter the <Gateway> and <Subnet Mask> as same to those of your computer found in Step 2.
8. Set the <Device Port> and <HTTP Port>.
Set the Device Port and HTTP Port by referring to next page.
English-4
Connection Mode
Interface
Port
 IP Type Static
 Transfer Bandwidth 2Mbps
 IP Address 192.168.1.200
 Gateway 192.168.1.1
 Subnet Mask 255.255.255.0
 DNS Manual 168.126.63.1
OK Cancel
Connection Mode
Port
Interface
 Protocol Type TCP
 Device Port 4520 ~ 4524
 UDP Port 8000 ~ 8160
 Unicast/Multicast UDP-Unicast
 Multicast IP Address 224.126.63.1
 Multicast TTL 5
 HTTP Port 80
 Secure Video Transmission ON OFF
* Multi Browser Support:
Device Port 4505~4530, HTTP Port 80
OK Cancel