Switching on
The cruise control is switched on
manually: it requires a minimum vehicle
speed of 25 mph (40 km/h).
F Turn wheel 1 to the "CRUISE" position: the
cruise control mode is selected but is not
switched on (Pause).
F Press button 2 or 3: your vehicle's current
speed becomes the cruise speed.
The cruise control is activated (ON).
Modification of the speed
setting
With the cruise control switched on (ON), you
can then modify the speed setting in one of the
following ways:
-
by pressing button 5:
F the six memorised speeds are displayed
in the the touch screen tablet,
F pressing the the button for the speed
setting you have chosen.
The value is then displayed in the
instrument panel.
The selection screen closes after a few
moments.
The modification is then accepted.
Or by:
-
using buttons 2 or 3:
F by successive short presses, to modify
the speed by + or - 1 mph (km/h),
F by a long press, to modify the speed in
steps of + or - 5 mph (km/h).
The memorised speeds can be
programmed in the "Driving
assistance" menu.
For more information on the list of
memorised speeds, refer to the
"Memorising speeds" section.
Driving
5
97