Driving
Pause
The cruise control is paused manually
or by pressing the brake or clutch pedal
or if the ESP system is invoked for
safety reasons.
once switched on, you can pause the cruise
control at any time by pressing button 4: the
screen confirms the pause.
Exceeding the programmed
speed
It is possible to exceed the programmed speed
temporarily by pressing the accelerator pedal.
To return to the programmed speed, simply
release the accelerator pedal until the
programmed cruise speed is reached again.
If the programmed speed is exceeded,
the displayed speed flashes.
once the speed of the vehicle returns
to the programmed speed setting, the
display becomes steady again.
98
Switching off
F Turn wheel 1 to the "0" position.
The display of information related to the
cruise control disappears.
Operating fault
Flashing of the dashes indicates a fault with the
cruise control.
Have it checked by a CITROËN dealer or a
qualified workshop.
When the cruise control is switched on,
be careful if you maintain the pressure
on one of the programmed speed
changing buttons: this may result in a
very rapid change in the speed of your
vehicle.
do not use the cruise control on
slippery roads or in heavy traffic.
on a steep descent, the cruise control
will not be able to prevent the vehicle
from exceeding the programmed speed.
On steep climbs or when towing, the
programmed speed may not be reached
or maintained.
The use of mats not approved by
CITROËN may interfere with the
operation of the cruise control.
To avoid any risk of jamming of the
pedals:
-
ensure that the mat is secured
correctly,
-
never fit one mat on top of another.