Rar-3U4 - Hitachi RAR-3R5 User Manual

9-6
REMOTE CONTROLLERS OPERATION
9.1.1.4 RAR-3U4 (For RAS-WX8)
AUTO
HEAT
FAN
FAN SPEED
EX-LOW
LOW
MED
HIGH
Note: When the unit is in standby mode, pressing EXTENDED AIRFLOW button will activate SELF CLEANING function.
DEHUMIDIFYING
COOL
PLASMA ION
EXTENDED AIR
FLOW
Signal emitting window/transmission sign
Point this window towards the indoor unit when controlling it. The
transmission sign blinks when a signal is sent.
Display
This indicates the room temperature selected, current time, timer status,
function and intensity of circulation selected
START/STOP button
Press this button to start operation. Press it again to stop operation.
PLASMA ION button
Press this button to activate/deactivate plasma ion function.
FAN SPEED selector
This determines the fan speed. Every time you press this button, the intensity of
circulation will change from
(EX-LOW). (This button allows optimal setting)
SLEEP button
Use this button to set the sleep timer.
TEMPERATURE button
Use these buttons to raise or lower the temperature setting. (Keep pressed, and the
value will change more quickly)
TIME button
Use this button to set and check the time and date
RESET button
Press this button after the batteries are replaced or when some irregular
operation is found.
FUNCTION button
Use this button to select the operating mode. Every time you press it, the mode will
change from (AUTO) to
(FAN) cyclically.
FAN SPEED selector
AUTO SWING button
EXTENDED AIRFLOW button.
TIMER control
.Use these buttons to set the timer.
OFF-TIMER button.
Select the turn OFF time
ON-TIMER button.
Select the turn ON time
RESERVE button.
Time setting reservations.
CANCEL button.
Cancel time reservation.
START/STOP
SLEEP
TIME
TIMER SET
TIMER SELECTOR
ON TIMER
OFF TIMER
(AUTO) to (HI) to (MED) to
(HEAT) to (DEHUMIDIFY) to
Pushes air out further for an extended airflow.
STOP (Cancel)
START (Reserve)
AUTO SWING
(LOW) to
(COOL) and to