4. HDMI UNIT ASSY
Proceeding :
CABINET TOP
(1) Remove the screws, then remove the BACK PANEL and the HDMI BRACKET.
U model
Direction of photograph: A
(2) Cut wire clamp band, then disconnect the connector wires and the FFC cables. Remove the screws and the
SUPPORT PWB.
Remove the PCB SIRIUS and the PCB RS232 from the PCB SIDE CNT(Board to board).
STYLE PIN : Loose
HDMI UNIT ASSY
SIRIUS UNIT
232C UNIT
FFC cable
HDMI UNIT ASSY
→
cut
N4201
SUPPORT P.W.B.
15
STYLE PIN : Loose
HDMI BRACKET
FFC cable