Page 2
Crossover Frequency: 4 H -16 H ∗ WIRING: In most cases, the HRSIW8 amplifier will be located at the head-end (rack). Therefore, a - ∗ conductor speaker wire will need to be run from the head-end to each subwoofer loca on.
Page 3
HRSIW8 can be mounted hori ontally or ver cally as shown above, however the ∗ subwoofer can be installed on the side or rear walls as well. Installing the HRSIW8 in the corner of a room will reinforce the low frequencies and is ∗ ideal for a home theater applica on.
Page 4
HRSIW8 can be mounted hori ontally or ver cally as shown above, however the ∗ subwoofer can be installed on the side or rear walls as well. Installing the HRSIW8 in the corner of a room will reinforce the low frequencies and is ∗ ideal for a home theater applica on.
Page 5
The HRSIW8 Remote: The remote control gives you the ability to easily calibrate the amp/ subwoofer for the room and type of audio you are listening to. Use the S display on the front of the amp to view the se ngs during adjustments.
Need help?
Do you have a question about the HRSIW8 and is the answer not in the manual?
Questions and answers