Attaching The Lens; Detaching The Lens - Panasonic ET-DLE030 Operating Instruction

Attaching the Lens / Detaching the Lens (continued)

Attaching the Lens

* Unless specified otherwise, the illustrations in these operating instructions show the lens used with the
PT-DZ870 projector.
Guide groove Lens mount cover
Fixed-focus lens

Detaching the Lens

B
A
C
B
Lens release
A
button
Positioning guide
Lens mount cover
1) With the lens mount cover that
came with your projector attached,
align the positioning guide on the
lens with the guide groove on the
projector, and insert the lens fully.
zThere is a red dot at the bottom right end of the
positioning guide.
2) Rotate the lens clockwise until you
hear a "click".
Attention
z Gently turn the projection lens counterclockwise
to check that it will not fall out.
1) Turn the lens mount cover
counterclockwise to detach it from
the lens and slide it towards the
front end of the lens.
2) Hold down the lens release
button while turning the lens
counterclockwise to release it.
3) Turn the lens mount cover
clockwise to reattach it.
Attention
z Attach the supplied lens cap before storing the lens.
ENGLISH-5