Trouble Shouting - Pro2 MD 41133 Instruction Manual

Trouble shouting

To solve the common problem, read the trouble shooting list. If you still can not solve
the problem, consult your nearest service dealer.
Symptom
No power.
Disc cannot be loaded.
Disc cannot be read.
No sound
The operation keys
do not work
Sound skips
The radio does not
work.
The radio station
automatic selection
does not work
22
Cause
The car ignition is not on.
The fuse is blown.
Presence of CD disc inside.
Inserting the disc in upside
down.
Compact disc is extremely
dirty or defective.
Temperature inside the car
is too high.
Volume is in minimum.
Wiring is not poperly
connected.
1. The built-in microcomputer
is not operating properly
due to noise.
2. Front panel is not
properly fix into its place.
The installation angle is
more than 30 degrees.
The disc is extremely dirty
or defective.
The antenna cable is not
connected.
The signals are too weak.
Solution
If the power supply properly
connected to the car accessory
switch the ignition key to ACC".
Replace the fuse.
Remove the disc.
Remove the disc in the player
then put a new upward.
Clean the disc or try to play
a new one.
Cool off until the ambient
temperature returns to normal.
Adjust volume to a desired level
Ceck wiring connection
1. Press the RESET button
2. Reinstall the front panel
Adjust the installation angle
to less than 30 degrees.
Clean the compact disc/try
to play a new one.
Insert the antenna cable
firmly. Select a station
manually.