How To Use Your Steam Cleaner - ONE dupray Instruction Manual

en

HOW TO USE YOUR STEAM CLEANER

FILLING WITH WATER
Remove the boiler cap (2) and fill with 1.2 L (40 oz) of water in the boiler. Use
the provided funnel if needed. The more water you put in, the more humidity
will be contained in the steam. The more space you leave for steam, the drier
it will be. Do not put more water than the recommended quantity. Securely
replace the boiler cap.
IMPORTANT:
Do not overfill with water. Leave space for steam!
PLUGGING IN THE MACHINE
Unravel completely the electrical cord. Connect the electrical cord
to a 13 amp 230V power outlet (make sure the circuit
is not already used by another high wattage appliance).
TURNING THE MACHINE ON
Turn the main dial to the position. At this position the orange SteamReady™
indicator will come on when the unit reaches operating pressure, after
approximately 8 minutes of heating time.
During use, the orange SteamReady™ indicator will turn on and off.
This is normal, and indicates that steam is being generated in the boiler.
8