ONE dupray Instruction Manual page 5

IMPORTANT WARNING
Steam is a powerful tool. Like any other tool, it should be used with caution. Certain surfaces, fabrics, materials and finishes are water
and heat sensitive and can be damaged or discolored by steam. ALWAYS check with the manufacturer of the surface or product being
cleaned before using steam. TEST a small, hidden surface to make sure the surface can be steamed.
DO NOT leave steam in one spot on any surface for any period of time with a wet cleaning cloth/pad attached as this will damage your floors.
DO NOT use on unsealed wood, on wood or tile floors that are highly worn, unfinished or have a wax or oil finish.
Surfaces that have been treated with wax or no-wax floors may be damaged by heat.
DO NOT use on leather, synthetic fabrics, velvet or other delicate, steam-sensitive materials.
DO NOT use the steam cleaner for any other purpose than what is described in the instructions manual.
In no event is Dupray liable for incidental or consequential damages to anyone, of any nature whatsoever. Some states/provinces
do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
ELECTRICAL INSTRUCTIONS
To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit simultaneously with the steam cleaner.
If an extension cord is necessary, a 13-amp rated cord should be used. Cords rated for less may overheat and cause damage.
WATER INSTRUCTIONS
Your steam cleaner has been designed for use with normal tap water. In order to extend the life of this product, if the water is very hard
where you live, we recommend using 50% normal tap water combined with 50% distilled water.
IMPORTANT :
Never put anything else other than water in the boiler.
en
4