Declaration Of Conformity - ion science GasClam User Manual

Gasclam

Declaration of Conformity

The manufacturer, Elok-Opava, hereby declares and confirms that the characteristics of the product conform to the
technical requirements stipulated by the technical standards. Furthermore, the manufacturer declares the product to be
safe whilst adhering to the correct conditions for its installation, maintenance and use.
Manufacturer: Elok-Opava s r.o., Sàdek 17, 747 75 Velké Heraltice, Czech Republic
Product Description: A landfill Gas monitor designed for in-situ borehole monitoring. The entire casing is made from
solid stainless steel. The battery pack is in the upper part of the housing in a flame-proof casing. The measuring unit
consisting of four gas sensors is located in the intrinsically safe lower part of the housing. The valves, pump and filter
assembly are located at the bottom of the housing.
Authorised Subject: FTZÚ, AO 210, NB 1026, Pikartská 7, 716 07 OSTRAVA-RADVANICE, IČO-00577880
Type of Protection:
Certificate Number: Quality assurance notification: FTZÚ 02 ATEX Q 025 according to EN 13980, CE 1026
FTZÚ 07 ATEX 0105X
Method of Determining Conformity: The product‟s conformity with the respective requirements of directive 94/9/EC
List of Technical Regulations and Standards:
02600-00-001, NKO
PTTI EN 60079-0:2006
PTTI EN 60079-1:2004
PTTI EN 60079-11:2007
Directive 2004/108EC
Name: Ing. Jiri Klein
Signature:
II 2G Ex d ib [ib] IIB T4
- it was compared with the submitted documentation
-
it was tested according standards
Electrical Apparatus for Potentially Explosive Atmospheres – General Requirement
Electrical Apparatus for Explosive Gas Atmospheres. Flameproof enclosures „d‟
Explosive Atmospheres – Equipment Protection by Intrinsic Safety „I‟
EN 61326-1:2006 – Electrical Equipment for Measurement
Date: 03/06/2008
Position: Managing Director
Page 3 of 37
Ion Science Ltd