Roberts Gorden bzc 700 Operation Manual
  1. Manuals
  2. Brands
  3. Roberts Gorden Manuals
  4. Controller
  5. bzc 700
  6. Operation manual

Roberts Gorden bzc 700 Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

WARNING
Improper installation, adjustment, alteration, service
or maintenance can result in death, injury or property
damage. Read the installation and operation
manuals thoroughly before installing or servicing
this equipment.
Installation must be done by an electrician qualified
in the installation of control systems for heating
equipment.
© Copyright 2000 Roberts-Gordon
ROBERTS GORDON
BZC 700
CONTROLLER
Operation Manual
Please take the time to read and understand
these instructions prior to any installation.
Installer must give a copy of this manual to the owner.
Keep this manual in a safe place to provide your
serviceman with information should it become
Roberts-Gordon
Oxford Street
Bilston, West Midlands WV14 7EG UK
Telephone: +44 (0) 1902 494425
Fax:
+44 (0) 1902 403200
http://www.rg-inc.com
®
Installer
Owner
necessary.
Roberts-Gordon
1250 William Street
P.O. Box 44
Buffalo, New York 14240-0044
Telephone: 716.852.4400
Fax: 716.852.0854
Toll Free: 800.828.7450
Roberts-Gordon Canada Inc.
241 South Service Road West
Grimsby, Ontario L3M 1Y7 Canada
Telephone: 905.945.5403
Fax: 905.945.0511
Toll Free: 800.663.9025
10071600UK Original Issue
09/00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the bzc 700 and is the answer not in the manual?

Questions and answers

Related Manuals for Roberts Gorden bzc 700

Summary of Contents for Roberts Gorden bzc 700

  • Page 1 ® ROBERTS GORDON BZC 700 CONTROLLER Operation Manual WARNING Installer Please take the time to read and understand Improper installation, adjustment, alteration, service these instructions prior to any installation. or maintenance can result in death, injury or property Installer must give a copy of this manual to the owner.

  • Page 3: Table Of Contents

    4.13 Changing the Override Limits ..9 5. The ROBERTS GORDON® BZC 700 Controller Warranty ....10 © 2000 All rights reserved.

  • Page 5: Introduction

    CONTROLLER? ual to notify you of possible fire, ® The ROBERTS GORDON BZC 700 is a electrical or burn hazards. Please micro processor based controller designed pay special attention when reading for the most efficient control of CORAYVAC ®...

  • Page 6: Specifications

    ® ROBERTS GORDON OPERATION MANUAL u u SECTION 2: SPECIFICATIONS BZC 700 Quality in Any Language HOLS VIEW ENTER OVER PROG SCROLL RIDE U.S.A.  1.716.852.4400 Canada  1.905.945.5403 U.K.  +44 (0) 1902 494425 Internet  www.rg-inc.com WARNING: Disconnect from electrical supply before removing this cover...
  • Page 7 2: S SECTION PECIFICATION ® FIGURE 2 - ROBERTS GORDON BZC Controller Quick Programming Guide...

  • Page 8: Viewing Screen Displays

    ® ROBERTS GORDON OPERATION MANUAL u u SECTION 3: VIEWING SCREEN DISPLAYS The screen will now show: By selecting 1, the status and recorded tem- In Normal (Run) Mode, the following options perature for each zone can be viewed for a are available without the entry of a security 24 hour period in 15 minute intervals.

  • Page 9: Programming Options

    ENTER THE REQUIRED 'NIGHT' TEMPERATURE temperature. This is automatically (SETBACK OR FROST, e.g. 04°C) : 06 calculated by the ROBERTS GOR- ® BZC 700 Controller giving the Press two digits for the required temperature required temperature at the time set. and then press ENTER.

  • Page 10: Manual Override Temperature

    ® ROBERTS GORDON OPERATION MANUAL 4.3.5 The screen will now show: Enter end time 1200. The screen will now show: ENTER SWITCHING TIMES FOR PERIOD 1 MON START: 08.00 END: 00.00 ENTER SWITCHING TIMES FOR PERIOD 1 SAT START: 08.00 END: 12.00 Enter end time 1700.

  • Page 11: Holiday Periods

    There are two options available on the 4.7.4 At the end of the holiday period, press the ROBERTS GORDON ® BZC 700 Controller HOLS key to return to normal switching for setting holiday periods. The first is to pre- times. program known holiday periods. This The screen will now show: sequence is described below.

  • Page 12: Seasonal Time Adjustment

    ® ROBERTS GORDON OPERATION MANUAL 4.8.3 The screen will now show: 4.10.4 Press RUN to return to Normal (Run) Mode. 4.10.5 If any mistakes were made during the pro- THE CLOCK IS NOW SET AT : 14: 15 gramming sequence, see Page 5, Section PLEASE ENTER A NEW TIME : 4.1 for corrective action.

  • Page 13: Changing The Override Limits

    SECTION PROGRAMMING OPTIONS 4.12.4 Press RUN to return to Normal (Run) Mode. 4.13.5 The screen will now show: 4.12.5 Override Code ENTER THE TEMPERATURE OFFSET UPPER LIMIT The screen will now show: YOU WANT FROM THE DOWN BUTTON. :05 ENABLE OVERRIDE CODE? The default upper offset limit of 5 <00>...

  • Page 15: The Roberts Gordon® Bzc 700

    Roberts-Gordon's negligence or any defect in the Fair wear and tear, misuse, abuse, neglect or ROBERTS GORDON ® BZC 700 Controller to £2 mil- ® modification of the ROBERTS GORDON lion. 700 Controller in any way; All other rights, warranties or conditions implied by...

Table of Contents