Hyundai HYBC5200 User Manual page 17

To fully tighten use the supplied spark plug box spanner. N.B. To tighten you need to turn box
spanner in an anti-clockwise direction.
2.9. Attaching cutting assembly to drive shaft.
To attach the cutter assembly remove the protection bung (retain for future use) – undo the
locking hand wheel, press the locking trigger and insert the cutter assembly into the drive
assembly until it locates with the shaft. Once located the locking trigger will drop into place,
pull shaft in outward direction to make sure it has locked. Once this is done tighten the locking
hand wheel.
Page 17 Rev 3 - September 2016