Hardware Installation - D-Link DCS-6115 Quick Install Manual

Mounting to a Ceiling or a Wall
1. Locate an area on the ceiling or wall which can support the weight of the camera.
2. Attach the alignment stencil to the ceiling or wall.
3. Drill two pilot holes where the holes of the alignment stencil are located.
4. Insert the supplied plastic anchors into the drilled holes and align the holes at the base
of the camera with the plastic anchors.
5. The camera can be mounted with the cables routed through the ceiling or wall, or left
exposed from the side.
6. Insert the provided screws through the holes. Use a screwdriver to tighten and secure.
D-Link DCS-6115 Quick Install Guide

4. Hardware Installation

3