Section 6 Bluetooth ® Operation; Operating Bluetooth; Electromagnetic Interference - Icom IC-120 Full Manual

6
Bluetooth® OPERATION

Operating Bluetooth

If the UT-133A Bluetooth
transceiver, you can connect a Bluetooth
When you connect the VS-3 Bluetooth
to the transceiver, you can wirelessly transmit and
receive the headset audio.
The VS-3 has a [PTT] switch, so you can transmit in
the same way as using the transceiver's [PTT] switch.
Communication range of Bluetooth
10 meters (32.8 ft).
Transceiver with the
UT-133A
Bluetooth
The Bluetooth communication range may vary,
®
depending on your operating environment.
Microwave ovens or Wireless LANs may cause
interference. In that case, stop using those devices
or move away from them.
This Bluetooth headset has a usable range. If
®
communication is unstable, move within the range.
®
® is installed in the
unit
® headset.
®
headset
® is approximately
Optional vs-3
Bluetooth ®
headset
Bluetooth
®
®
unit

Electromagnetic interference

When you use a Bluetooth
the following:
Bluetooth devices operate in the 2.4 GHz band.
®
The 2.4 GHz band is also used by other devices, such
as Wireless LAN products, microwave ovens, RFID
systems, amateur radio stations, and so on.
When using the Bluetooth
devices, interference may occur, causing a decrease
in communication speed, and an unstable connection.
In such cases, use the headset away from the other
devices, or stop using those headsets.
6-2
headset, pay attention to
®
headset near such
®