Maintenance And Cleaning; Environmental Protection - Bosch GWS 6-100 Operating Instructions Manual

Rotating the Machine Head
Before any work on the machine itself, pull
the mains plug.
guide/cutting grinder stand (accessory) or for
left-handed persons.
Unscrew completely the four screws.
Rotate the machine head carefully and without
removing from the housing to the new position.
Screw in the screws again and tighten.

Maintenance and Cleaning

Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and the ventilation slots clean.
In extreme working conditions, conductive
dust can accumulate in the interior of the
machine when working with metal. The
protective insulation of the machine can be
degraded. The use of a stationary extrac-
tion system is recommended in such cases
as well as frequently blowing out the venti-
lation slots and installing a residual current
device (RCD).
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
11 • 1 609 929 H79 • 05.04
The machine head
can be rotated with
respect to the ma-
chine housing in 90°
steps. In this manner,
the On/Off switch
can be brought to an
advantageous han-
dling position for spe-
cial working situa-
tions, e. g., for cutting
work with the cutting
English - 6

Environmental Protection

Recycle raw materials instead of
disposing as waste
The machine, accessories and
packaging should be sorted for en-
vironmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
Service and Customer
Assistance
Exploded views and information on spare
parts can be found under:
www.bosch-pt.com
Southern India
Bosch Service Center
No 49, Ethiraj Salai
Egmore Chennai 600 008
..............................................
Fax:
...........................................
Western India
Bosch Service Center
No 41, 41 A Appa Baug Building
Maharshi Karve Marg (opp. Charni Road Station )
Mumbai 400 002
..............................................
Fax:
...........................................
Northern India
Bosch Service Center
Rishyamook, 85 A
Panchuin Road Delhi 110 001
..............................................
Fax:
...........................................
Subject to change without notice
+91 (0)44 - 28 23 19 46
+91 (0)44 - 28 27 93 55
+91 (0)22 - 22 01 46 49
+91 (0)22 - 22 08 40 05
+91 (0)11 - 23 34 82 64
+91 (0)11 - 23 34 82 64