Description - Lamborghini Caloreclima 55PM Installation And Maintenance Manual

Should the burner's mains cable be found faulty, it must only be replaced by qualified persons.
Do not touch the burner with parts of the body wich are wet or when in bare feet.
Do not pull (stretch) the mains cables and keep them well away from heat sources.
The length of the cables used must enable the burner to be opened, as well as the boiler door.
● After removing the packaging materials, check the content integrity and make sure that no damages have
occured during transportation. In case of doubt, do not use the burner and contact the supplier.
The packaging material (wooden cages, cartons, plastic bags, foam, clips, etc...) are
potential sources of pollution and danger, if left lying around; they should be collected up and disposed of
in the correct way (in a suitable place).

DESCRIPTION

These are forced-draught burners, with gas/air mix at the combustion head.
They are suitable for operating with high-pressure or vacuum chambers according to relevant operational
fields.
The long draught tube slides on a flange to satisfy every possible application.
These burners combine great flame stability with total safety and high performance. They feature a reulator/
stabilizer which keeps the gas/air ratio constant even in the presence of normal causes of combustion process
disturbance such as voltage fluctuations (which cause alterations in the motor rpm), deposits on the fan, etc..
45