Safety Information; Items Supplied; Layout - Bavaria BBC 43/1 Original Operating Instructions

Anleitung_BBC_43_1_SPK7__ 22.11.13 09:37 Seite 18
GB
Important.
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety information with due care. Keep these
operating instructions in a safe place so that the
information is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and the safety information as
well. We cannot accept any liability for damage or
accidents which arise due to a failure to follow these
instructions and the safety information.

1. Safety information

Please refer to the booklet included in delivery for the
safety information.
CAUTION
Read all the safety regulations and instructions.
Any errors made in following the safety information
and instructions set out below may result in an
electric shock, fire and/or serious injury.
Keep all safety information and instructions in a
safe place for future use.
Safety devices
When working with the equipment, the appropriate
plastic guard hood for cutting blade mode or cutting
line mode must be fitted to prevent objects being
thrown out by the equipment. The integrated blade in
the cutting line guard hood automatically cuts the line
to the optimum length.
Assembly: During assembly, take care not to let any
foreign bodies get inside the equipment or the
operation of the coupling will be impaired by dirt.
After assembly: When the equipment is running in
idling mode, the tool is not allowed to rotate. If this is
not the case, an error was made during the assembly
work.
2. Layout (Fig. 1-15)
1. Long handle
2a. Right steady grip
2b. Left steady grip
3. Petrol tank
4. Starter cable
5. Air filter housing cover
6. Choke lever
7. Cable connection
18
8. Spark plug connector
9. On/Off switch
10. Throttle lever lock
11. Throttle lever
12. Throttle lever block
13. Engine assembly
14. Long handle assembly
15. Harness
16. Line spool with cutting line
17. Line cutter
18. 2x cable tie
19. Slotted screwdriver
20. Spark plug wrench
21. Allen key 5 mm
22. Allen key 4 mm
23. Oil/petrol mixing bottle
24. Cutting line guard
25. Top part of the steady grip holder
26. Cutting blade guard hood
27. Cutting blade
28. 4x Allen screw M6x30, spring washer, washer
29. 4x Allen screw M5x25, spring washer, washer
30. 2x hex screw M6x16
31. 3x line cutter fastening screw (L = 10mm)

3. Items supplied

Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, please keep the packaging until the
n
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts.
There is a danger of swallowing or suffocating!
Engine assembly
n
Long handle assembly
n
Steady grip on the left
n
Harness
n
Line spool with cutting line
n
Thread cutter
n
2x cable tie
n
Slotted screwdriver
n
Spark plug wrench
n
Allen key size 5 mm
n
Allen key size 4 mm
n