Model Indication and How to Order
Summary of Product Parts
No.
Part names
1
Communication connector
2
Power supply connector
3
Input block connector
4
Output block connector
5
Display
6
Switch protective cover
7
Ground terminal
8
MAC address
∗1: For wiring method, refer to subsection "Wiring" (page 12) in this manual.
∗2: For display and setting method, refer to subsection "LED Indication and Settings" (page 15) in this manual.
TM
Connect the EtherNet/IP
Supplies power to the solenoid valve, Output block, SI unit and Input block.
Connects the Input block.
Connects the solenoid valve, Output block, etc.
LED display showing the SI unit status.
Incorporates the internal switch setting IP address and communication method.
Used for grounding.
A unique MAC address of 12 hexadecimal number digits to each SI unit.
-9-
Application
∗ 1
line.
∗ 2
∗ 1
∗ 2
No.EX##-OMK0004-A