Recommended Audio Format Options - Oppo udp-203 User Manual

S E T U P M E N U O P T I O N S

Recommended Audio Format Options

Depending on your specific audio/video connection method, the Audio Output Setup options of the UDP-203
may need to be adjusted to match your configuration. Refer to the video and audio connection methods
described previously in this guide and the following audio setup guidelines.
Audio Connection Directly to TV
If the player is connected directly to the TV through HDMI (as described on page 13) or through DVI and
analog L/R audio cables, it is recommended that you use the following audio format options:
o
Secondary Audio:
o
HDMI Audio Format:
o
SACD Output:
o
S/PDIF Output:
Multi-Channel Digital Audio to Receiver through HDMI
If the player is connected to an A/V receiver or processor with HDMI inputs (as described on page 12), you
can send all current audio formats to your receiver in pure digital form. To get the best possible audio via
HDMI, you may need to set the following options on the player's Audio Output Setup menu:

If your receiver supports HDMI v1.3 with decoding capability for high resolution lossless audio
formats such as Dolby TrueHD and DTS-HD Master Audio, please use the following audio
output setup options:
o
Secondary Audio:
o
HDMI Audio Format:
o
SACD Output:
o
S/PDIF Output:

If your receiver supports HDMI v1.1/1.2 Multi-Channel PCM audio, but not high resolution
lossless audio formats such as Dolby TrueHD and DTS-HD Master Audio, please use the
following audio output setup options:
o
Secondary Audio:
o
HDMI Audio Format:
o
SACD Output:
o
S/PDIF Output:
Multi-Channel Analog Audio to Receiver
If the player is connected to an A/V receiver through the 7.1ch or 5.1ch analog audio jacks using 8 or 6 RCA
cables (as described on page 15), you can play all supported audio formats and listen to them with your A/V
receiver and surround sound systems. The following audio output setup options are recommended:
o
Secondary Audio:
o
HDMI Audio Format:
o
SACD Output:
o
S/PDIF Output:
Also set the Speaker Configuration in the Audio Processing menu:

Set Down Mix to 7.1Ch or 5.1Ch.
On
LPCM
PCM
(any – not in use)
Off(or On if you need secondary audio)
Bitstream
PCM (or DSD if the receiver supports DSD over HDMI)
(any – not in use)
Off (or On if you need secondary audio)
LPCM
PCM (or DSD if the receiver supports DSD over HDMI)
(any – not in use)
Off (or On if you need secondary audio)
Off
PCM or DSD (depending on your listening preference)
(any – not in use)
60