QUIPPLAN Q20 User Manual page 18

Throw the battery away following the local normatives about elimination of contaminating residues. If there is any query
about its recycling, ask an official dealer or contact us at www.quipplan-mobility.com. Do not throw the battery away in the
dustbin.
Do not dismantle or grind the battery. If there are any leak in the battery, avoid the contact with the eyes or skin. If the
contact has already been produced, clean the zone immediately with water and ask for medical assistance
3. OPERATING INSTRUCTIONS
The battery is sent conditioned and charged at the maximum level. There is not necessary to charge before the first use.
To charge the battery, connect first the charger to the power point and then connect the charger to the
battery.
Note: More info about the charging proccess in QUICK GUIDE and CHARGER sections.
The charging process takes between 3 and 6 hours, depending on the charger used.
The autonomy of the battery relies on multiple factors as the selected level of assistance, the orography of the tour, the
weight of the user, the pedal, etc. The atonomy of the battery for a medium person in an urban mixed tour is until 60 km
(level 3 selected) or until 120 km (level 1 selected).
Note: More info about autonomy in www.quipplan-mobility.com
If the battery will not be used in a long period of time (more than 2 months), make sure the level of charge is at an optimal
in a conservation state. In that case, charge the battery for 1 approx. one hour every two months. It is also recommended
to revise the level of charge periodically.
If the battery will not be used in a long period of time, take it out of the bicycle.
When the loosing charge times or the autonomy of the bicycle are significantly lower as usual, replace the battery.
4. ADDITIONAL INSTRUCTIONS
The presence of this symbol in the batteries, manual, package of a product or other devices means that,
when their shelf life is over, they must not be eliminated by throwing them away into the dustbin. If the
chemical symbols Hg, Cd o Pb are shown, they indicate that the device includes mercury, cadmium or
lead in higher levels tan the reference values admitted by the Directive 2006/66/CE of the European
Union. If the device is not eliminated conveniently, these substances might cause personal injuries or
damage
SX0011.C 1
the environment.
SX0011.C 17