QUIPPLAN Q20 User Manual page 14

2.4. Support assistance (6 km/h)
Once the panel i son, keep the button [ - ] pressed to activate this
function. The screen will show the letters PUS. When this mode is on,
the bicycle reaches 6 km/h. The support assistance function stops
when the button [ - ] is pressed.
¡Warning! The support assistance function should only be used as a
support when the bicycle is being dragged. It must never be used
during the ride.
2.5. Switching the lights on and off
Keep the button [ + ] pressed for 2 seconds to switch the light son. When
the lights are on, the panel brights and the symbol of the lights will be
shown on the screen.
Keep the button [ + ] pressed for 2 seconds to switch the lights off.
Turning the device and the bicycle off as the point 2.2 explains, the lights
will switch off automatically.
2.6. Selection of the level of assistance
When the device is turned on, the level of assistance is automatically
fixed in level 1. Press the buttons [ + ] and [ - ] to select the desired level
of assistance:
Nivel 0: Without
assistance
Level 1: Minimum assistance (ECO)
Level 2: Medium assistance (TOUR)
Level 3: Maximum assistance
(BOOST)
The bicycle migh also be used when the device is off. In that case, the bicycle is ridded as a conventional bike and it will
not register the velocity and distance data, as well as the other functions of the odometer.
2.7. Battery charge level indicator
SX0011.C 1 SX0011.C 13