Strong XENON GLADIATOR II Instruction Manual page 4

THE LAMPHOUSE is supplied with a 13 foot cable containing the DC leads, the AC control
wires, and the ground wire. The cable terminates in a multiple pin MS connector keyed to mate with the
receptacle on the power supply.
WHEN TRANSPORTING THE SPOTLIGHT, it is necessary to remove the xenon bulb and
place it in its original shipping container to prevent breakage. See the SAFETY PROCEDURES section
following, and permit only authorized personnel to handle the xenon bulb.
IF AT ANY TIME you have a suggestion, or desire aid in securing anticipated results, write
directly to STRONG INTERNATIONAL, 4350 McKinley Street, Omaha, Nebraska 68112.
XG2/002