Thames & Kosmos TK1 User Manual page 8

BEFORE YOU START
Mounting and
adjusting the
viewfinder
YOU WILL NEED
› Assembled telescope
› Viewfinder
HERE'S HOW:
1. The viewfinder must have its larger opening
(the objective) pointing away from the
viewer.
2. Loosen the two knurled screws at the end of
the telescope, insert them into the two holes
in the viewfinder bracket, and tighten them
again. The holes in the bracket are elongated.
Make sure that the viewfinder sits parallel to
the telescope.
3. Outside during the day, point the telescope at
a target on the horizon at least 500 meters
away (such as a tower, tree, or building).
6
1
2