Thames & Kosmos TK1 User Manual page 24

VIEWING
Viewing in daytime
YOU WILL NEED
› Fully assembled telescope
› Image reversal lens
HERE'S HOW:
1. Start by inserting the image reversal lens into
the eyepiece extension until it hits the stop,
and secure it tight with the two knurled
screws.
2. Then, insert the eyepiece into the image
reversal lens and clamp it on tight.
3. Use the viewfinder to orient your telescope
toward the observation target.
4. Bring the target into focus by rotating the
eyepiece extension.
22
1
2
4