Advertisement

Quick Links

User's instructions
SCOLAclassmate

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the scolaclassmate and is the answer not in the manual?

Questions and answers

Summary of Contents for Widex scolaclassmate

  • Page 1 User’s instructions SCOLAclassmate...
  • Page 2: Table Of Contents

    SCOLAclassmate ....... 5 changes considered necessary.
  • Page 3: Introduction

    FM signal in a given location. SCOLAclassmate and the other parts of the SCOLA system are developed specifically for children and SCOLAclassmate can be of particular advantage in educational environments.
  • Page 4: Scolaclassmate And Accessories

    SCOLAclassmate and accessories Description SCOLAclassmate Stand Mechanical design The maximum thickness of the unit is 110 mm. LED indicator behind the front plate. The LED indicates differ- ent conditions depending on status. Wall mount Screws and fasteners The size of the rear plate is 125 x 193 mm.
  • Page 5: How Does Scolaclassmate Work

    This is done with a SCOLAteach, SCOLAteach TT or SCOLAprogrammer. synchronised to the channel used in the classroom. After one minute, the SCOLAclassmate starts to send In the standard SCOLAflex setting, a beep will be out the channel synchronisation signal. This signal heard every time the receiver receives a synchronisa- tion signal.
  • Page 6: Installation

    1. Find a convenient location for mounting the SCOLAclassmate. Placement SCOLAclassmate is intended to be mounted on a wall 2. Use the wall mount as a guide to mark the loca- in the classroom or placed in its stand on a shelf or tion of the two holes.
  • Page 7: In The Stand On A Shelf

    In the stand on a shelf ers and screw the screws into the holes. Take If the SCOLAclassmate is not intended to be located care not to bend the wall mount during mount- permanently in one place, for example if it is needed ing.
  • Page 8: Led Legend

    LED legend Operation The LED indicates as follows: Switching the SCOLAclassmate on/off Press the on/off button to turn the SCOLAclassmate Constant red: 1. Normal function on external power The LED will be lit and it will be possible to change the synchronisation channel for one minute. After 2.
  • Page 9: Programming

    “Set channel” under the “Flex programming” menu. 1. Clean the SCOLAclassmate with a dry, soft cloth. Hold the SCOLAteach / SCOLAprogrammer with- 2. Do not disassemble the SCOLAclassmate, other in a distance of approximately 50 cm from the SCOLA units or the hearing aid, as this will void SCOLAclassmate and press the “Enter”...
  • Page 10: Troubleshooting

    No light in the LED: classmate is turned on. • Check that the SCOLA 7. Do not use SCOLAclassmate on aeroplanes or in hospitals without permission. • Check mains supply (power outlet). 8. If you use the SCOLA FM system together with •...
  • Page 11: Warranty

    Magnetic field strength: - 15 dB uA / m @ 10 m Compliance: Electromagnetic directive: SCOLAclassmate contains a very weak inductive radio transmitter. The emission power is below interna- tional emission limits for human exposure. Just for comparison, the emission from SCOLAclassmate is less than unintended radio frequency emissions from, for example, hair dryers and electric shavers.
  • Page 12: Statements For Use In The Usa And Canada

    1. This device may not cause harmful interference. 2. This device must accept any interference re- ceived, including interference that may cause undesired operation. Changes or modifications made to the equipment not expressly approved by Widex may void the FCC’s authorization to operate the equipment.
  • Page 13 ID: U28EZYNC01 IC: 1350B-EZYNC01 Printed by FB / 02-09 ¡9 514 0125 001h¤ ¡001ª¤ 9 514 0125 001 #01...

Table of Contents