Salon Systems T-Max Manager User Manual page 31

11) In the File name window, type in the file name that fits the format described below:
File Name Description
Before#.wav Message sounded while room # is in delay. If you selected Play DIFFERENT
Message for Individual Rooms under Message During Delay in Section 6.4.2,
then this is the file name you give your recording.
Beforeall.wav
If you want the same message sounded in all rooms while in delay. If you
selected Play SAME Message for ALL Rooms under Message During Delay in
Section 6.4.2, then this is the file name you give your recording.
After#.wav
Message sounded while room 3 is in dirty or cool down mode. If you selected
Play DIFFERENT Message for Individual Rooms under Message During Cool
Down and Dirty Room in Section 6.4.2, then this is the file name you give your
recording.
Afterall.wav
If you want the same message sounded in all rooms in dirty or cool down mode.
If you selected Play SAME Message for ALL Rooms under Message During
Cool Down and Dirty Room in Section 6.4.2, then this is the file name you give
your recording.
If the message you just recorded is the message you want to play in room 4 while room 4
is in delay, the file name MUST be named as follows: Before4.wav. This will allow you
to play a different message for each bed.
If the file you just recorded is to be played in every room while any room is in delay, the
file MUST be named as follows: Beforeall.wav.
If the message you just recorded is the message you want to play in room 6 while room 6
is in dirty room or cool down mode, the file MUST be named as follows: After6.wav.
If the file you just recorded is to be played in every room while any room is in dirty room
or cool down mode, the file MUST be named as follows: Afterall.wav. This will allow
you to play a different message for each bed.
T-Max® Manager/Plus and T-Max®3A/F/I User's Guide Page 29