Table of Contents
Advertisement
Figure 3-30. Wireless Security 802.11x Screen
Figure 3-31. Wireless Security WPA Screen
The Apply button will temporarily save these settings. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All. Then turn off and turn on the
router to put the settings into effect.
6218-A2-GB20-00
the address of the RADIUS server, the Port, the shared Secret, and the
Interval in seconds at which authentication must be repeated.
— WPA (Wi-Fi Protected Access). For WPA you can specify a RADIUS
server (as with 802.1x, above) or a Pre-Shared Key (PSK).
February 2005
3. Using the Web Interface
3-35
Advertisement
Table of Contents
