Table of Contents
Advertisement
3. Using the Web Interface
To configure a service, game, or other application:
Procedure
Figure 3-15. Port Forwarding: Netmeeting
3-20
1. From the Home screen, click on Advanced.
2. Under Advanced, select Port Forwarding.
3. Select the computer hosting the service and add the corresponding firewall
rule.
4. If you want to add a custom application, select the User category, click on
New, and fill in the port, protocols and description for your application.
For example, if you want to host a Netmeeting session, from the Home screen,
click on Advanced and under Advanced, select Port Forwarding. First select
the IP address for your Netmeeting server. Next select the Audio/Video
category and add Netmeeting to the Applied Rules box. To view the
management rules, highlight Netmeeting and select view. This will display the
preconfigured protocols and ports that Netmeeting will use. Now you can run
Netmeeting from your server and call users that are on the Internet. If they
know your WAN IP address, users can call you.
5. The Apply button will temporarily save these settings. To make the change
permanent, click on Tools and select System Commands. On the System
Commands page, click on Save All.
February 2005
6218-A2-GB20-00
Advertisement
Table of Contents
